1 vCPU · 2 GB RAM
32 GB SSD
$10.00
/month equivalent
About $0.0139/hour while running
When stopped: storage only, about $0.0028/hour.
Configure in dashboard
Cloud APIs for MT4, MT5, cTrader and TradeLocker
Connect your code
to MT4 & MT5
from anywhere.
Read account data, stream prices, and execute trades from Python, Node.js, or C# through managed REST and gRPC APIs — without managing a Windows VPS.
No card needed to sign up
Cloud EAs, trade copiers & VPS
Pay only for usage
MT4, MT5, cTrader & TradeLocker support
Managed terminal recovery
Read account data · cURL
Connect a demo account in your dashboard, then replace the API key and terminal ID below.
curl --request GET "https://mt5.mrpc.pro/AccountSummary" \
--header "APIKey: YOUR_API_KEY" \
--header "id: YOUR_TERMINAL_ID"Read-only request
Returns the account balance, equity and details. It does not place a trade.
Open the MT5 API explorerSDKs available
Go, Python, JS, C#
What would you like to do first?
Choose a goal and we'll open the right setup. You can switch at any time.
MT5 API · 2:02
Run your first MT5 API demo.
Connect. Read. Open a demo position. Inspect it, close it, and disconnect.
Run a live demo Watch on YouTubeRead the transcript
This tutorial shows you how to run a complete MT5 API example. We will connect, read account data, open and inspect a demo position, then close it and disconnect.
Open M R P C dot pro slash API. Click Run a live demo to jump to the example.
Every language listed here can run online on this website. For this walkthrough, choose JavaScript. The selected tab turns blue, and the example code changes to match.
Click Run full demo. This creates a fresh demo account and connects to MT5. Keep the page open while the console reports each stage.
Read the live console. After connecting and reading the account, the example opens a zero point zero one lot Euro U S dollar demo position. It reads the position, closes it, verifies the close, and disconnects. Only demo funds are traded.
Check the result before using the code. Success and disconnected must both be true. The open response reports trade retcode done. The opened positions include the position ticket. The final position list should be empty.
When signed in, click Download example. Expand Run locally for the runtime requirements and command. Keep your API key private. Guests can try the browser demo free, and sign up to download their own example.
You have completed the demo workflow. Use your own API key for your application, retain the cleanup steps, and always disconnect when finished. You can replay any step and follow the written instructions without audio.
Connect to MT4 & MT5 brokers
FTMO
IC Markets
Pepperstone
Exness
FundedNext
Tickmill
XM
FXCM
Security & Speed
Enterprise-Grade Reliability & Security
Engineered for quantitative funds, algorithmic traders, and high-volume trade copying.
Non-Custodial & Encrypted
Your funds stay strictly with your broker. Credentials are AES-256 encrypted at rest and never shared.
Managed Cloud Infrastructure
Hosted in Falkenstein, Germany. Request and execution times depend on the broker, network, and operation.
Zero Windows Maintenance
We manage terminal hosting and automatic session recovery so you can focus on your application.
How it works
Your application calls MetaRPC, which manages the MetaTrader terminal and connects it to your broker.
Your Application
Your app makes REST, WebSocket, or gRPC calls to the MetaRPC cloud API.
Any language: C#, Java, Python, PHP, Go, JS
Hosted Terminal
Official MT4 and MT5 terminals run on our servers and take your calls through an Expert Advisor.
Managed infrastructure, auto-scaling
MT4/5 Servers
Expert Advisor sends your requests to the broker server and returns results.
Direct RPC Socket connection
Supports RESTful • WebSocket • gRPC protocols
Pricing & Access
$4 per terminal/month. As low as $1.50 at volume.
Cloud Hosted (Pay-As-You-Go)
Usage estimate
Account-hour calculator
CURRENT TIER
Developer Base Tier
Start at $4 per terminal for 720 hours (30 days). Each hour is charged at the rate your combined month-to-date account-hours have reached: $3.50 from 7,200 hours (10 accounts running all month), down to $1.50 from 1,080,000 hours (1,500 accounts). A lower rate applies to usage from then on, not to earlier charges, and the count restarts on the 1st of each month. Usage is charged per minute.
Terminals connected 24/7
1
0
100
500
2,500
5,000
HOURLY RATE REACHED
$0.0056
per account-hour, at month end
AVERAGE PER TERMINAL
$4.00
per terminal for the month
Estimated Total / Month
$4
all terminals, a full month 24/7
VOLUME SAVING
0%
vs $4 per terminal
Minimum top-up: $1.00. Demo-account purchases, EA workloads, and VPS hosting are charged separately. This estimate covers one standard API terminal.
Get started
Cloud Infrastructure Highlights
-
No Base Commitment $0 monthly minimums. Pay only for terminals while they are connected.
-
Fully Managed No local terminal installations or remote VPS instances required.
-
European Cloud Hosting Terminals are hosted in Falkenstein, Germany. Test with your broker to measure the latency for your integration.
-
Volume Discounts Your rate decreases as accumulated account-hours reach each monthly usage threshold.
-
Prepaid Balance Top up your balance by credit card, wire transfer, or crypto.
Aggregated Billing
Account-hours are combined across your terminals. Each usage charge uses the tier reached at that time; the selected tier is not a retroactive discount on earlier usage.
cTrader and TradeLocker: 50% of the MetaTrader price
The same API key, balance and volume tiers. Only connected time is billed; a connection you close within its first hour is billed as one hour, also at half price.
| Tier (account-hours this month) | MT4 / MT5, per account per month | cTrader / TradeLocker, per account per month | cTrader / TradeLocker, per hour |
|---|---|---|---|
| Developer Base Tier 0+ | $4.00 | $2.00 | $0.0028 |
| Standard Tier 7,200+ | $3.50 | $1.75 | $0.0024 |
| Growth Tier 72,000+ | $3.00 | $1.50 | $0.0021 |
| Professional Tier 360,000+ | $2.50 | $1.25 | $0.0017 |
| High-Volume Tier 720,000+ | $2.00 | $1.00 | $0.0014 |
| Enterprise Scale Tier 1,080,000+ | $1.50 | $0.75 | $0.0010 |
Connected hours count at 50% toward the monthly volume tiers; an account is billed once, however many connections it has. At zero balance, connections are suspended and resume automatically after a deposit.
Trade copier: $1.00 per month per copier
A copier costs $1.00 for 720 hours (30 days) and is billed by the minute only while it runs — pause it and the meter stops. One flat rate: no tiers, no minimum, and its hours do not count toward the terminal volume tiers. It is paid from the same balance as your terminals; when the balance is used up, your copiers are suspended and resume automatically after a deposit (a copier you paused yourself stays paused).
Dedicated IP: $6 per month per terminal
Reserve a static egress IP for one terminal's broker traffic for $6 per month, on top of your usage. The terminal connects through an IP used by no one else, which you can whitelist with your broker. Billed while the IP is assigned.
Need a custom enterprise setup?
We provide specialized builds for hedge funds and brokers requiring custom logic, dedicated infrastructure, and 24/7 priority support.
Cloud VPS hosting
Choose the resources you need
Choose CPU, RAM, storage and an operating system in your dashboard. VPS hosting is charged per minute from your prepaid balance, separately from API terminals and EAs.
$4.00 per vCPU + $4.00 per 2 GB RAM + $2.00 per 32 GB SSD, per month.
2 vCPU · 4 GB RAM
64 GB SSD
$20.00
/month equivalent
About $0.0278/hour while running
When stopped: storage only, about $0.0056/hour.
Configure in dashboard4 vCPU · 8 GB RAM
128 GB SSD
$40.00
/month equivalent
About $0.0556/hour while running
When stopped: storage only, about $0.0111/hour.
Configure in dashboard8 vCPU · 16 GB RAM
256 GB SSD
$80.00
/month equivalent
About $0.1111/hour while running
When stopped: storage only, about $0.0222/hour.
Configure in dashboardExample configurations. Monthly estimates assume 720 hours of continuous use; actual charges follow hourly usage. CPU and RAM charges stop when the VPS is stopped; storage remains billable.
FAQ
Frequently Asked Questions
Everything you need to know about integrating with MetaRPC APIs and Trade Copier.
No. MetaRPC runs and manages the MetaTrader terminals in the cloud. You interact solely through modern REST, WebSocket, or gRPC endpoints from Linux, macOS, Docker, or serverless environments.